peace of mind.
TURBO REPAIRS UK GIVE 2 YEAR WARRANTIES WITH ALL WORK ! turbo repairs uk offer a 2 year warranty to the original purchaser for the repair or replacement of their turbocharger …
THE IMPORTANCE OF ASKING WHY A TURBO HAS FAILED!
replacing a failed turbo is not just about ‘how’ -how do I remove and re-fit a replacement turbo or even ‘what’-what is wrong with the turbo, it is also and …
cosworth turbo with uprated bearings.
this cosworth turbo has been given a three hundred and sixty degree thrust bearing and staggered gap oil piston ring. these upgrades are vital when these turbos are knocking out …
what should I do if my turbocharger fails?
the most important step is to find the cause of the failure, so the same thing does not happen a second time. there are many types of turbo charger failures …
TURBOCHARGER BACK TO BASICS
A turbocharger is basiclly an air pump that is driven by the engines exhaust gases. it pressurizes the intake to allow more air to go to the cylinder. more air …
A Guideline to the Installation of your New Turbo
Before you start fitting your turbo make sure you know why the original turbo failed in the first place and rectify the fault. Remember, turbochargers are very reliable; less than 1% …
BMW 1 Series Turbo is Ready To Fit
This BMW 1 series turbo is ready to fit back to its engine. The turbo came in with play on the bearings and oil leaking from the turbine side. On inspection …
Important Fitting Information (part 1)
So why did your last turbo fail? It is vital to identify why your last turbo failed, and rectify the fault – otherwise the replacement could fail too. More than …
So Why Did Your Last Turbo Fail?
It is vital for you to identify why your last turbo failed so you can rectify the fault – otherwise the replacement could fail too. More than 95% of failures …
Mercedes c220 Turbocharger with blown seals.
Here we have a reconditioned Mercedes c220 turbocharger ready for delivery to Wyre Tyres of Thornton. It arrived with wear to the bearings caused by a restriction of oil in …